Rust Requires Chilkat v11.0.0+
Rust
Sign ITIDA JSON and Send to ETA (Egypt Tax Authority) Portal
See more Egypt ITIDA Examples
Demonstrates how to ITIDA canonicalize JSON, create signature, and send to the ETA Portal.Chilkat Rust Downloads
// This example assumes the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.
let crypt = chilkat::Crypt2::new();
crypt.set_verbose_logging(true);
let cert = chilkat::Cert::new();
cert.set_verbose_logging(true);
// Set the smart card PIN, which will be needed for signing.
cert.set_smart_card_pin("12345678");
// There are many ways to load the certificate.
// This example was created for a customer using an ePass2003 USB token.
// Assuming the USB token is the only source of a hardware-based private key..
if cert.load_from_smartcard("").is_err() {
println!("{}", cert.last_error_text());
return;
}
// Tell the crypt class to use this cert.
if crypt.set_signing_cert(&cert).is_err() {
println!("{}", crypt.last_error_text());
return;
}
let cms_options = chilkat::JsonObject::new();
// Setting "DigestData" causes OID 1.2.840.113549.1.7.5 (digestData) to be used.
let _ = cms_options.update_bool("DigestData", true);
let _ = cms_options.update_bool("OmitAlgorithmIdNull", true);
// Indicate that we are passing normal JSON and we want Chilkat do automatically
// do the ITIDA JSON canonicalization:
let _ = cms_options.update_bool("CanonicalizeITIDA", true);
crypt.set_cms_options(&cms_options.emit().unwrap_or_default());
// The CadesEnabled property applies to all methods that create CMS/PKCS7 signatures.
// To create a CAdES-BES signature, set this property equal to true.
crypt.set_cades_enabled(true);
crypt.set_hash_algorithm("sha256");
let json_signing_attrs = chilkat::JsonObject::new();
let _ = json_signing_attrs.update_int("contentType", 1);
let _ = json_signing_attrs.update_int("signingTime", 1);
let _ = json_signing_attrs.update_int("messageDigest", 1);
let _ = json_signing_attrs.update_int("signingCertificateV2", 1);
crypt.set_signing_attributes(&json_signing_attrs.emit().unwrap_or_default());
// By default, all the certs in the chain of authentication are included in the signature.
// If desired, we can choose to only include the signing certificate:
crypt.set_include_cert_chain(false);
// Pass a JSON document such as the following. Chilkat will do the ITIDA canonicalization.
// (It is the canonicalized JSON that gets signed.)
// Note: The JSON should NOT begin with "{ "documents" : [ ..."
// {
// "issuer":{
// "address":{
// "branchID":"0",
// "country":"EG",
// "regionCity":"Cairo",
// "postalCode":"",
// "buildingNumber":"0",
// "street":"123rd Street",
// "governate":"GOVERNATE"
// },
// "type":"B",
// "id":"209999899",
// "name":"Xyz SAE"
// },
// "receiver":{
// "address":{
// "country":"EG",
// "regionCity":"CAIRO",
// "postalCode":"11435",
// "buildingNumber":"0",
// "street":"Autostrad Road Abc",
// "governate":"GOVERNATE"
// },
// "type":"B",
// "id":"999999999",
// "name":"XYZ EGYPT FOR TRADE"
// },
// "documentType":"I",
// "documentTypeVersion":"1.0",
// "dateTimeIssued":"2020-11-15T11:04:53Z",
// "taxpayerActivityCode":"1073",
// "internalID":"ZZZZ999",
// "purchaseOrderReference":"2009199918",
// "salesOrderReference":"",
// "payment":{
// "bankName":"",
// "bankAddress":"",
// "bankAccountNo":"",
// "bankAccountIBAN":"",
// "swiftCode":"",
// "terms":""
// },
// "delivery":{
// "approach":"",
// "packaging":"",
// "dateValidity":"",
// "exportPort":"",
// "countryOfOrigin":"EG",
// "grossWeight":0,
// "netWeight":0,
// "terms":""
// },
// "invoiceLines":[
// {
// "description":"CDM Widget 48GX99X12BA",
// "itemType":"GS1",
// "itemCode":"7622213335056",
// "unitType":"CS",
// "quantity":1.00,
// "unitValue":{
// "currencySold":"EGP",
// "amountEGP":588.67,
// "amountSold":0,
// "currencyExchangeRate":0
// },
// "salesTotal":588.67,
// "total":603.97,
// "valueDifference":0,
// "totalTaxableFees":0,
// "netTotal":529.8,
// "itemsDiscount":0,
// "discount":{
// "rate":10.00,
// "amount":58.87
// },
// "taxableItems":[
// {
// "taxType":"T1",
// "amount":74.17,
// "subType":"No sub",
// "rate":14.00
// }
// ],
// "internalCode":"9099994"
// }
// ],
// "totalSales":588.67,
// "totalSalesAmount":588.67,
// "totalDiscountAmount":58.87,
// "netAmount":529.80,
// "taxTotals":[
// {
// "taxType":"T1",
// "amount":74.17
// }
// ],
// "extraDiscountAmount":0,
// "totalItemsDiscountAmount":0,
// "totalAmount":603.97,
// }
// Create the CAdES-BES signature.
crypt.set_encoding_mode("base64");
// Make sure we sign the utf-8 byte representation of the JSON string
crypt.set_charset("utf-8");
let json_invoice = "{ ... }".to_string();
let Ok(sig_base64) = crypt.sign_string_enc(&json_invoice) else {
println!("{}", crypt.last_error_text());
return;
};
println!("Base64 signature:");
println!("{}", sig_base64);
// Insert the base64 signature into the JSON to be sent
let json = chilkat::JsonObject::new();
let _ = json.load(&json_invoice);
let _ = json.update_string("signatures[0].signatureType", "I");
let _ = json.update_string("signatures[0].value", &sig_base64);
json.set_emit_compact(true);
// Wrap the JSON in {"documents":[ ... ]}
let sb_to_send = chilkat::StringBuilder::new();
let _ = sb_to_send.append("{\"documents\":[");
let _ = sb_to_send.append(&json.emit().unwrap_or_default());
let _ = sb_to_send.append("]}");
// ------------------------------------------------------------------------
// Get an access token using our client ID and client secret key
let client_id = "abc999ff-1234".to_string();
let client_secret_key = "123fff22-1234-abcd".to_string();
let http = chilkat::Http::new();
// Causes the Authorization: Basic header to be added..
http.set_login(&client_id);
http.set_password(&client_secret_key);
http.set_basic_auth(true);
let req = chilkat::HttpRequest::new();
req.set_http_verb("POST");
req.set_path("/connect/token");
req.set_content_type("application/x-www-form-urlencoded");
req.add_param("grant_type", "client_credentials");
req.add_header("Connection", "close");
http.set_accept("application/json");
let resp = chilkat::HttpResponse::new();
if http.http_req("https://id.preprod.eta.gov.eg/connect/token", &req, &resp).is_err() {
println!("{}", http.last_error_text());
return;
}
let _ = http.close_all_connections();
println!("Response status code: {}", resp.status_code());
println!("Response body:");
println!("{}", resp.body_str());
if resp.status_code() != 200 {
println!("Failed.");
return;
}
let json_token = chilkat::JsonObject::new();
let _ = json_token.load(&resp.body_str()).is_ok();
let access_token = json_token.string_of("access_token").unwrap_or_default();
println!("access_token = {}", access_token);
// ------------------------------------------------------------------------
// Submit the signed JSON to the ETA (Egypt Tax Authority) Portal
// No longer sending basic authentication...
http.set_login("");
http.set_password("");
http.set_basic_auth(false);
// Setting the AuthToken property causes the "Authorization: Bearer <token>" header to be added to each request.
http.set_auth_token(&access_token);
let url = "https://api.preprod.invoicing.eta.gov.eg/api/v1/documentsubmissions".to_string();
let json_str = sb_to_send.get_as_string().unwrap_or_default();
if http.http_str("POST", &url, &json_str, "utf-8", "application/json; charset=utf-8", &resp).is_err() {
println!("{}", http.last_error_text());
return;
}
println!("Response status code: {}", resp.status_code());
println!("Response body:");
println!("{}", resp.body_str());