DataFlex

Multiple SendReqExec on the Same Connection

Demonstrates running a series of commands on one SSH connection using SendReqExec. Each exec request requires its own logical channel — this is not a separate SSH connection, just a new session channel on the existing one.

Background: An SSH session channel is single-use for an exec request: once the command runs and the server closes the channel, that channel cannot be reused. Opening a fresh channel per command is cheap, since the expensive work — the TCP connection, key exchange, and authentication — is done once and shared. This is why running ten commands over one connection is far faster than connecting ten times.

Chilkat DataFlex Downloads

Download Chilkat for DataFlex

DataFlex

Use ChilkatAx-win32.pkg

Procedure Test
    Boolean iSuccess
    Handle hoSsh
    String sHostname
    Integer iPort
    String sPassword
    Integer iChannelNum
    String sCmdOutput
    String sTemp1
    Boolean bTemp1

    Move False To iSuccess

    //  This example requires the Chilkat API to have been previously unlocked.
    //  See Global Unlock Sample for sample code.

    //  Demonstrates running a series of commands on one SSH connection using SendReqExec.  Each exec
    //  request requires its own logical channel.  This is not a new SSH connection -- it is simply a
    //  new session channel on the existing one.

    Get Create (RefClass(cComChilkatSsh)) To hoSsh
    If (Not(IsComObjectCreated(hoSsh))) Begin
        Send CreateComObject of hoSsh
    End

    Move "ssh.example.com" To sHostname
    Move 22 To iPort
    Get ComConnect Of hoSsh sHostname iPort To iSuccess
    If (iSuccess = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    //  Normally you would not hard-code the password in source.  You should instead obtain it
    //  from an interactive prompt, environment variable, or a secrets vault.
    Move "mySshPassword" To sPassword

    Get ComAuthenticatePw Of hoSsh "mySshLogin" sPassword To iSuccess
    If (iSuccess = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    //  IMPORTANT: Set a read timeout.  ReadTimeoutMs defaults to 0, which means no limit -- without
    //  it, this call waits forever if the server never sends channel close.
    Set ComReadTimeoutMs Of hoSsh To 15000

    //  ---- 1st command, on its own session channel ----
    Get ComOpenSessionChannel Of hoSsh To iChannelNum
    If (iChannelNum < 0) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Get ComSendReqExec Of hoSsh iChannelNum "ls -al" To iSuccess
    If (iSuccess = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Get ComChannelReceiveToClose Of hoSsh iChannelNum To iSuccess
    If (iSuccess = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Get ComGetReceivedText Of hoSsh iChannelNum "utf-8" To sCmdOutput
    Get ComLastMethodSuccess Of hoSsh To bTemp1
    If (bTemp1 = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Showln sCmdOutput
    Showln "----"

    //  ---- 2nd command, on a NEW session channel over the same connection ----
    Get ComOpenSessionChannel Of hoSsh To iChannelNum
    If (iChannelNum < 0) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Get ComSendReqExec Of hoSsh iChannelNum "nslookup chilkatsoft.com" To iSuccess
    If (iSuccess = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Get ComChannelReceiveToClose Of hoSsh iChannelNum To iSuccess
    If (iSuccess = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Get ComGetReceivedText Of hoSsh iChannelNum "utf-8" To sCmdOutput
    Get ComLastMethodSuccess Of hoSsh To bTemp1
    If (bTemp1 = False) Begin
        Get ComLastErrorText Of hoSsh To sTemp1
        Showln sTemp1
        Procedure_Return
    End

    Showln sCmdOutput

    Send ComDisconnect To hoSsh


End_Procedure