AutoIt
AutoIt
Amazon SES v2: Check an address on the account suppression list
See more Amazon SES Examples
Look up one address in the sending Region with ses:GetSuppressedDestination. The record distinguishes a bounce from a complaint. An absent record tells you only that this account suppression lookup found no entry. The example signs the exact encoded mailbox path and also works with temporary credentials.
Chilkat AutoIt Downloads
Local $bSuccess = False
; Assumes Chilkat is unlocked. See Global Unlock Sample.
$bSuccess = False
; Look up the address exactly as stored, including any plus tag.
Local $sAddress = "avery+orders@example.com"
Local $sRegion = "us-west-2"
Local $sAccessKey = "AWS_ACCESS_KEY_ID"
Local $secretKey = "AWS_SECRET_ACCESS_KEY"
Local $sessionToken = ""
$oHost = ObjCreate("Chilkat.StringBuilder")
$oHost.Append("email.")
$oHost.Append($sRegion)
$oHost.Append(".amazonaws.com")
$oMailbox = ObjCreate("Chilkat.StringBuilder")
$oMailbox.Append($sAddress)
$oPath = ObjCreate("Chilkat.StringBuilder")
$oPath.Append("/v2/email/suppression/addresses/")
$oPath.Append($oMailbox.GetEncoded("url_rfc3986","utf-8"))
; SigV4 for SES encodes the wire path a second time in the canonical request.
; Only the canonical copy escapes the percent signs. Send the original path over HTTPS.
$oCanonicalPath = ObjCreate("Chilkat.StringBuilder")
$oCanonicalPath.Append($oPath.GetAsString())
Local $iReplaced = $oCanonicalPath.Replace("%","%25")
$oClock = ObjCreate("Chilkat.CkDateTime")
$oClock.SetFromCurrentSystemTime()
$oStamp = ObjCreate("Chilkat.StringBuilder")
$oStamp.Append($oClock.GetAsTimestamp(False))
$iReplaced = $oStamp.Replace("-","")
$iReplaced = $oStamp.Replace(":","")
Local $sDate = $oStamp.GetRange(0,8,False)
$oRest = ObjCreate("Chilkat.Rest")
$oRest.AddHeader("Host",$oHost.GetAsString())
$oRest.AddHeader("x-amz-date",$oStamp.GetAsString())
$oHeaders = ObjCreate("Chilkat.StringBuilder")
$oHeaders.Append("host:")
$oHeaders.Append($oHost.GetAsString())
$oHeaders.Append(@LF & "x-amz-date:")
$oHeaders.Append($oStamp.GetAsString())
$oHeaders.Append(@LF)
Local $signedHeaders = "host;x-amz-date"
If ($sessionToken <> "") Then
$oRest.AddHeader("x-amz-security-token",$sessionToken)
$oHeaders.Append("x-amz-security-token:")
$oHeaders.Append($sessionToken)
$oHeaders.Append(@LF)
$signedHeaders = "host;x-amz-date;x-amz-security-token"
EndIf
$oCrypto = ObjCreate("Chilkat.Crypt2")
$oCrypto.HashAlgorithm = "sha256"
$oCrypto.MacAlgorithm = "hmac"
$oCrypto.EncodingMode = "hexlower"
$oCrypto.Charset = "utf-8"
$oCanonical = ObjCreate("Chilkat.StringBuilder")
$oCanonical.Append("GET" & @LF)
$oCanonical.Append($oCanonicalPath.GetAsString())
$oCanonical.Append(@LF & @LF)
$oCanonical.Append($oHeaders.GetAsString())
$oCanonical.Append(@LF)
$oCanonical.Append($signedHeaders)
$oCanonical.Append(@LF)
$oCanonical.Append($oCrypto.HashStringENC(""))
$oScope = ObjCreate("Chilkat.StringBuilder")
$oScope.Append($sDate)
$oScope.Append("/")
$oScope.Append($sRegion)
$oScope.Append("/ses/aws4_request")
$oToSign = ObjCreate("Chilkat.StringBuilder")
$oToSign.Append("AWS4-HMAC-SHA256" & @LF)
$oToSign.Append($oStamp.GetAsString())
$oToSign.Append(@LF)
$oToSign.Append($oScope.GetAsString())
$oToSign.Append(@LF)
$oToSign.Append($oCrypto.HashStringENC($oCanonical.GetAsString()))
; Derive the signing key one HMAC at a time. Decode each intermediate key from hex.
$oSeed = ObjCreate("Chilkat.StringBuilder")
$oSeed.Append("AWS4")
$oSeed.Append($secretKey)
$oCrypto.SetMacKeyString($oSeed.GetAsString())
Local $sKey = $oCrypto.MacStringENC($sDate)
$oCrypto.SetMacKeyEncoded($sKey,"hex")
$sKey = $oCrypto.MacStringENC($sRegion)
$oCrypto.SetMacKeyEncoded($sKey,"hex")
$sKey = $oCrypto.MacStringENC("ses")
$oCrypto.SetMacKeyEncoded($sKey,"hex")
$sKey = $oCrypto.MacStringENC("aws4_request")
$oCrypto.SetMacKeyEncoded($sKey,"hex")
Local $signature = $oCrypto.MacStringENC($oToSign.GetAsString())
$oAuthorization = ObjCreate("Chilkat.StringBuilder")
$oAuthorization.Append("AWS4-HMAC-SHA256 Credential=")
$oAuthorization.Append($sAccessKey)
$oAuthorization.Append("/")
$oAuthorization.Append($oScope.GetAsString())
$oAuthorization.Append(", SignedHeaders=")
$oAuthorization.Append($signedHeaders)
$oAuthorization.Append(", Signature=")
$oAuthorization.Append($signature)
$oRest.AddHeader("Authorization",$oAuthorization.GetAsString())
$oConnection = ObjCreate("Chilkat.Socket")
$oConnection.RequireSslCertVerify = True
$bSuccess = $oConnection.Connect($oHost.GetAsString(),443,True,10000)
If ($bSuccess <> True) Then
ConsoleWrite($oConnection.LastErrorText & @CRLF)
Exit
EndIf
$bSuccess = $oRest.UseConnection($oConnection,False)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $sResponseText = $oRest.FullRequestNoBody("GET",$oPath.GetAsString())
If ($oRest.LastMethodSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
If ($oRest.ResponseStatusCode = 404) Then
ConsoleWrite("No account suppression entry for this address in this Region." & @CRLF)
Exit
EndIf
If ($oRest.ResponseStatusCode <> 200) Then
ConsoleWrite("SES returned HTTP " & $oRest.ResponseStatusCode & " " & $sResponseText & @CRLF)
Exit
EndIf
$oResponse = ObjCreate("Chilkat.JsonObject")
$bSuccess = $oResponse.Load($sResponseText)
If ($bSuccess <> True) Then
ConsoleWrite($oResponse.LastErrorText & @CRLF)
Exit
EndIf
ConsoleWrite($oResponse.StringOf("SuppressedDestination.EmailAddress") & @CRLF)
ConsoleWrite("Reason: " & $oResponse.StringOf("SuppressedDestination.Reason") & @CRLF)
ConsoleWrite("Last updated (Unix seconds): " & $oResponse.StringOf("SuppressedDestination.LastUpdateTime") & @CRLF)