(Classic ASP) TCP or TLS over Multiple Hop SSH to Remote Server

Demonstrates how to use the Chilkat Socket API to connect to a remote server (using TCP or TLS) tunneled through mulitple-hop SSH. The scheme looks like this:

Application => ServerSSH1 => ServerSSH2 => DestinationServer

The ConnectThroughSsh and UseSsh methods are added in Chilkat version 9.5.0.55 to accomplish this task.

Chilkat ActiveX Downloads

ActiveX for 32-bit and 64-bit Windows

<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body>
<%
' This example requires the Chilkat API to have been previously unlocked.
' See Global Unlock Sample for sample code.

' For versions of Chilkat < 10.0.0, use CreateObject("Chilkat_9_5_0.Ssh")
set ssh1 = Server.CreateObject("Chilkat.Ssh")

' Connect directly to the 1st SSH server.
success = ssh1.Connect("serverssh1.com",22)
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( ssh1.LastErrorText) & "</pre>"
    Response.End
End If

' Authenticate using login/password:
success = ssh1.AuthenticatePw("ssh1Login","ssh1Password")
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( ssh1.LastErrorText) & "</pre>"
    Response.End
End If

' Connect through the 1st SSH connection to reach a 2nd SSH server.
' Note: Any number of SSH connections may be simultaneously tunneled through a single
' existing SSH connection.
' For versions of Chilkat < 10.0.0, use CreateObject("Chilkat_9_5_0.Ssh")
set ssh2 = Server.CreateObject("Chilkat.Ssh")
success = ssh2.ConnectThroughSsh(ssh1,"serverssh2.com",22)
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( ssh2.LastErrorText) & "</pre>"
    Response.End
End If

' Authenticate with ssh2...
success = ssh2.AuthenticatePw("ssh2Login","ssh2Password")
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( ssh2.LastErrorText) & "</pre>"
    Response.End
End If

' For versions of Chilkat < 10.0.0, use CreateObject("Chilkat_9_5_0.Socket")
set socket = Server.CreateObject("Chilkat.Socket")

' Tell the socket object to connect to our destination server though the ssh2 tunnel (which itself is routed through ssh1).
' The connection looks like this:  ApplicationSocket(TLS) => ServerSSH1 => ServerSSH2 => DestinationServer
success = socket.UseSsh(ssh2)
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( socket.LastErrorText) & "</pre>"
    Response.End
End If

' Connect using TLS to www.chilkatsoft.com
' We could also tunnel a bare TCP connection by specifying port 80 with useTls = 0.
useTls = 1
maxWaitMillisec = 20000
success = socket.Connect("www.chilkatsoft.com",443,useTls,maxWaitMillisec)
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( socket.LastErrorText) & "</pre>"
    Response.End
End If

' Once the multiple hop SSH tunneled connection is setup,  the socket programming
' is identical to the normal case where we have a direct connection.

' Tell the socket object that all text is to be sent in the utf-8 encoding,
' and the text received is assumed to be utf-8.
socket.StringCharset = "utf-8"

' Send an HTTP HEAD request:
success = socket.SendString("HEAD / HTTP/1.1" & vbCrLf & "Host: www.chilkatsoft.com" & vbCrLf & vbCrLf)
If (success <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( socket.LastErrorText) & "</pre>"
    Response.End
End If

' Wait a maximum of 4 seconds while no data is forthcoming:
socket.MaxReadIdleMs = 4000

' Get the 1st response line, which should be "HTTP/1.1 200 OK"
responseStatusLine = socket.ReceiveToCRLF()
If (socket.LastMethodSuccess <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( socket.LastErrorText) & "</pre>"
    Response.End
End If

Response.Write "<pre>" & Server.HTMLEncode( "StatusLine: " & responseStatusLine) & "</pre>"

' Now get the 1st line of the response header:
responseHeaderLine = socket.ReceiveToCRLF()
If (socket.LastMethodSuccess <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( socket.LastErrorText) & "</pre>"
    Response.End
End If

Response.Write "<pre>" & Server.HTMLEncode( "HeaderLine: " & responseHeaderLine) & "</pre>"

' Now read the remainder of the response header by reading until a double CRLF is seen:
remainderOfHeader = socket.ReceiveUntilMatch(vbCrLf & vbCrLf)
If (socket.LastMethodSuccess <> 1) Then
    Response.Write "<pre>" & Server.HTMLEncode( socket.LastErrorText) & "</pre>"
    Response.End
End If

Response.Write "<pre>" & Server.HTMLEncode( "Remainder: " & remainderOfHeader) & "</pre>"

' Close the connection with the server.  This closes the tunnel through ssh2.
' Wait a max of 20 seconds (20000 millsec)
success = socket.Close(20000)

' Close the connection with ssh2.  (This closes the the tunnel through ssh1.)
' The connection with ssh1 is still alive, and may be used for more connections.
ssh2.Disconnect 

ssh1.Disconnect 

%>
</body>
</html>